Skip to main content

Ecomax

ECOmax saw blades are special thin circular saw blades for the high-performance cutting of steel and non-ferrous metals. They are available in different versions, cutting materials and coatings. Through this, ECOmax saw blades are always individually tailored to the respective application. They are suitable for stationary mass cutting saws as well as for trailing or so-called flying saws.


High performance circular saw blades for all common stationary mass cutting circular saw machines

ECOmax - Alpha

  • Cermet tipped
  • For the cutting of solid materials from low to high-alloy steels
  • Smooth cutting surfaces

ECOmax - Beta

  • Cermet tipped
  • For the cutting of solid materials from low to high-alloy Steels
  • High contact surface
  • optimized cutting edge geometry

ECOmax – Plus

  • Cermet tipped
  • For the cutting of solid materials from low to high-alloy steels
  • Increase of the cutting performance, thanks to increased cutting parameters, as well as through an individual coating

Tooth number recommendation ECOmax-Alpha / EComax-Beta / ECOmax Plus

Sawing of solid materials

Diameter [mm]
Number of teeth54607280
Number of teeth607280
Number of teeth6072100
Number of teeth6080100120
Number of teeth506080100120
Number of teeth406080100120
Dimension range d [mm]40 - 6040 - 6020 - 4010 - 30
Dimension range d [mm]30 - 7520 - 6010 - 50
Dimension range d [mm]50 - 9040 - 6510 - 50
Dimension range d [mm]40 - 10035 - 6525 - 5020 - 40
Dimension range d [mm]60 - 13050 - 10040 - 8030 - 6030 - 55
Dimension range d [mm]120 - 16070 - 12045 - 9030 - 7520 - 70

ECOmax – Sigma

  • Carbide-tipped
  • For the separation of solid material with smaller and larger diameters and a high strength = >1100N/mm2
  • Increase of the cutting performance, thanks to increased cutting parameters, as well as through an individual coating

Application examples ECOmax Sigma

Material dimensionsMaterial dataSaw blade dataMachinePerformance
  QualityTensile strength
[N/mm²]
DiameterNumber of teeth
[N/mm²]
 Number of cutsAttained m²
6016MnCr561036080Ficep 1415440
9538MnSiV5100035080Rattunde365633

ECOmax – X

  • Carbide-tipped
  • For the cutting of high-alloy and stainless steels, as well as titanium and nickel-based alloys
  • Minimal waste
  • Individually adapted coatings
  • Economic separation through high contact surfaces

Application examples ECOmax X

Material dimensionsMaterial dataSaw blade dataMachinePerformance
  QualityTensile strength
[N/mm²]
DiameterNumber of teeth
[N/mm²]
 Number of cutsAttained m²
90TiAl6V490042580MFL188612
121X2CrNiMo18-14-373042060Behringer4666.98
55X6CrNiMoTi17-12-253046080Ficep21005

ECOmax – NF

  • Carbide-tipped
  • For the cutting of non-ferrous metals and alloys, such as aluminium, copper, brass and bronze
  • Minimal waste
  • High contact surface and smooth cutting surface

High performance circular saw blades for all rotating and stationary pipe and profile saws

ECOmax – Tube

  • Highest precision for the simultaneous use of 2 saw blades (optional)
  • High cutting performance and contact surface through a combination of individual cutting materials and coatings
  • Burr-free cut and smooth cutting surface
  • Salable surface quality

Application examples ECOmax Tube

Pipe dimensionsMaterial dataSaw blade dataMachinePerformance
 DiameterWall thickness QualityTensile strength
[N/mm²]
DiameterNumber of teeth Number of cutsAttained m²
76.24.2SAE 1010575550150Oto Mills41003.9
24.33.15E355800350120Rattunde7000014
21.7326MnB51600350120Rattunde100001.8
42.13.4S355460500140Oto Mills140006.3

ECOmax – Tube


ECOmax – Scarf

  • Highest precision for the simultaneous use of 2 saw blades (optional)
  • Developed and suitable for the cutting of tubes and profiles with a rough internal welding seam
  • High contact surface through a special tooth form and geometry in combination with a coating

ECOmax – Multi

  • The highest precision for the simultaneous use of 4 saw blades (optional) in a rotational sawing process for seamless and welded tubes and sections
  • High cutting performance and contact surface through a combination of individual cutting materials and coatings
  • Burr-free cut and smooth cutting surface

Application examples ECOmax Multi

Pipe dimensionsMaterial dataSaw blade dataMachinePerformance
 DiameterWall thickness QualityTensile strength
[N/mm²]
DiameterNumber of teeth Number of cutsAttained m²/blade
ø 1148.2J5555138066Oto Mills35004.2
160x1607ST5255038070SMS18004.7
120x1208ST5255038070SMS24804.6

Werkstoff- und Einsatzempfehlungen

WerkstoffgruppeDINBeste WahlGeeignetBedingt geeignet
BaustähleSt 44
ECOmax
ECOmax PLUS
ECOmax TUBE
ECOmax SCARF
ECOmax MULTI
ECOmax SIGMA
ECOmax X
BaustähleST 52
ECOmax
ECOmax PLUS
ECOmax TUBE
ECOmax SCARF
ECOmax MULTI
ECOmax SIGMA
ECOmax X
BaustähleST 37
ECOmax
ECOmax PLUS
ECOmax TUBE
ECOmax SCARF
ECOmax MULTI
ECOmax SIGMA
ECOmax X
Vergütungs- und NitrierstähleC 15
ECOmax
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax TUBE
Vergütungs- und NitrierstähleC 45
ECOmax
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax TUBE
Vergütungs- und NitrierstähleC 60
ECOmax
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax TUBE
Vergütungs- und Nitrierstähle42 CrMo 4
ECOmax
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax TUBE
Vergütungs- und Nitrierstähle34 CrNiMo 6
ECOmax
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax TUBE
Vergütungs- und Nitrierstähle34 CrAINi 7
ECOmax
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax TUBE
Feder- und Wälzlagerstähle50 CrV 4
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax
ECOmax TUBE
Feder- und Wälzlagerstähle100 Cr 6
ECOmax PLUS
ECOmax SIGMA
ECOmax X
ECOmax
ECOmax TUBE
Nichtrostende StähleX 40 CrMoV 51
ECOmax X
ECOmax SIGMA
ECOmax
ECOmax PLUS
Nichtrostende StähleX 5 CrNiMo 17 12 2
ECOmax X
ECOmax SIGMA
ECOmax
ECOmax PLUS
Nichtrostende StähleX 20 Cr 13
ECOmax X
ECOmax SIGMA
ECOmax
ECOmax PLUS
Nichtrostende StähleX 2 CrNIMo 18 14 3
ECOmax X
ECOmax SIGMA
ECOmax
ECOmax PLUS
Vergütete Stähle1000 - 1600 N/mm²
ECOmax SIGMA
ECOmax X
ECOmax
ECOmax PLUS
ECOmax TUBE
GraugussEN-GJL-200-300
ECOmax X
ECOmax PLUS
ECOmax SIGMA
ECOmax TUBE
GraugussEN-GJS-400-15
ECOmax X
ECOmax PLUS
ECOmax SIGMA
ECOmax TUBE
Nahtlos- und SchweissrohreS355
ECOmax SIGMA
ECOmax TUBE
ECOmax MULTI
ECOmax SCARF
 
Nahtlos- und SchweissrohreFE510
ECOmax SIGMA
ECOmax TUBE
ECOmax MULTI
ECOmax SCARF
 
Nahtlos- und Schweissrohre34MnB5 ≤ 1600 N/mm2
ECOmax SIGMA
ECOmax TUBE
ECOmax MULTI
ECOmax SCARF
 
Nahtlos- und SchweissrohreAPI
ECOmax SIGMA
ECOmax TUBE
ECOmax MULTI
ECOmax SCARF
 
Rohre u. Profile mit innenlieg., geschabter SchweißnahtS355
ECOmax
ECOmax SCARF
ECOmax TUBE
ECOmax MULTI
 
Rohre u. Profile mit innenlieg., geschabter SchweißnahtFE510
ECOmax
ECOmax SCARF
ECOmax TUBE
ECOmax MULTI
 
Rohre u. Profile mit innenlieg., geschabter Schweißnaht34MnB5 ≤ 1600 N/mm2
ECOmax
ECOmax SCARF
ECOmax TUBE
ECOmax MULTI
 
Rohre u. Profile mit innenlieg., geschabter SchweißnahtAPI
ECOmax
ECOmax SCARF
ECOmax TUBE
ECOmax MULTI
 
Aluminium Guss und Knetlegierungen≤ 500 N/mm2
ECOmax NF
ECOmax PLUS
ECOmax SIGMA
 
Kupfer, Kupferlegierungen≤ 400 N/mm2
ECOmax NF
ECOmax PLUS
ECOmax SIGMA
 
Messing, kurz- und langspanend≤ 600 N/mm2
ECOmax NF
ECOmax PLUS
ECOmax SIGMA
 
Bronze≤ 850 N/mm2
ECOmax NF
ECOmax PLUS
ECOmax SIGMA
 

A selection of suitable sawing machines for the ECOmax saw blades

ManufacturerTypeDiameterBoreholeConnection dimensionsBlade thicknessCutting width
      
AmadaCM - 65 AN280402/11/801.752.0
AmadaCM - 75 CNC285402/11/801.752.0
AmadaCM - 100 AN360404/11/902.252,6/2,7
AmadaCM - 100 CNC360404/11/902.252,6/2,7
AmadaCM - 150 AN460504/11/902.252,6/2,7
Behringer/EiseleHCS 70250/285402/12/65+2/15/801.752.0
Behringer/EiseleHCS 90285402/12/65+2/15/801.752.0
Behringer/EiseleHCS 90315402/12/65+2/15/801.92.2
Behringer/EiseleHCS 90360402/12/65+2/15/802.252,6/2,7
Behringer/EiseleHCS 130360/420402/12/65+2/15/802.252,6/2,7
Behringer/EiseleHCS 150360/420/460402/12/65+2/15/802.252,6/2,7
BewoECH-108-M250404/12/641.752.0
EverisingP - 65 A280322/10,5/631.752.0
EverisingP - 100 A360404/10,5/902.252,6/2,7
EverisingP - 150 A460504/14/902.252,6/2,7
ExactcutMAC60250324/9/501.752.0
ExactcutWSM-60-HM275324/9/501.752.0
ExactcutMAC60285324/9/501.752.0
FicepS 35360504/16/802.252,6/2,7
FicepS 50460504/16/802.252,6/2,7
Itec DualcutDC - 65285324/11/631.752.0
Itec DualcutDC - 85360404/11/632.252,6/2,7
KaltenbachKMR 100AP370504/15/802.252,6/2,7
KaltenbachMSK 471460504/15/802.252,6/2,7
KastoSpeed C7/ WAC70250/285324/9/501.752.0
KastoSpeed C9250/285324/9/501.752.0
KastoSpeed C9315324/9/501.92.2
KastoSpeed C14360/425504/15/802.252,6/2,7
KentaiKTC-65250/285324/9/50+4/11/631.752.0
KentaiKTC-85315324/9/50+4/11/631.92.2
MEGACS-65285322/10,5/451.752.0
MisslerCS 100360404/10/902.252,6/2,7
NishijimaNHC-050NA250324/11/631.752.0
NishijimaNHC-070NA285324/11/631.752.0
NishijimaNHC-100NA360504/16/802.252,6/2,7
NishijimaNHC-150NA460504/21/902.252,6/2,7
NoritakeNCS-2/65280402/11/801.752.0
NoritakeNSC-2/100360404/11/902.252,6/2,7
NoritakeNSC-2/150460504/11/902.252,6/2,7
RattundeACS350/360504/16/802.52.8
RSA RasacutSC/MC/SK/OC/TC250/315404/10/631,75/1,92,0/2,2
RSA RasacutCC90/SH90250/315404/10/631,75/1,92,0/2,2
RSA RasacutXXL/CC150/SH150350/460504/12/802,25/2,52.7
SimecSIMAX 100360504/16/802.252,6/2,7
SimecSIMAX 150460504/21/902.252,6/2,7
SinicoTOP 2000360504/16/802.252.6
SOCOSA - 60 - CNC250 / 280322/11/631.752.0
TsuneTK 5C-50 GL250/285324/11/631.752.0
TsuneTK 5C-102 GL360/420504/15/802.252,6/2,7